Hardware features
SHARED ELECTRONICS FOR ALL EVOLUTION MACHINES
- Machine equipped with three sidewall cameras to make precise measurements on body external profile
- Equipped with additional finish cameras for finish measurements
- Provides the advantages of non-contact online inspection
- 360° vision on the production line
Defect list
EVOLUTION DIM MEASURES ACCURATELY:
- article height
- minimum and maximum diameters
- roundness and barreling
- non-round sidewall,
- diameter deformation
- bulged or sunken sidewalls
- out-of-specification height
- tiny body deformations and minor geometrical defects on the body
- minimum and maximum finish external diameter
- finish height
- height of the finish ring
- finish flatness
Software inspection tools
Technical specifications
PRACTICAL INFORMATION NECESSARY FOR EVOLUTION DIM INSTALLATION
ELECTRICAL
| Power supply : | 230V 50/60Hz |
| Installed Power : | <3,2 kW |
| Fuse of line : | 16A |
| Number of Phases : |
COMPRESSED AIR
| Compressed Air : | 5-6 bar |
| Type of connection : | Air 3/8″ |
| Maximal consumption of air : | < 900Nl/min (calculated for a speed of 600bpm with 100% rejection) |
WEIGHT
| Weight of machine packed : | Approx. 600kg |
| Weight of machine : | Approx. 450 kg Dimensions |
DIMENSIONS
| Lenght : | 1200 mm |
| Width : | 1200 mm |
| Height: | from 1880 mm to 2080 mm (for a conveyor height between 900 mm and 1100 mm) |
| Charge on the ground : | 1,1 kg / cm2 |
TELEMAINTENANCE CONNECTION
| Access to internet or directly, or using the plant network. The machine has to be seen from outside of the plant using IP address given to IRIS Inspection machines. |
INFORMATION SYSTEM
| Connection to the production information system via protocol Modbus on Ethernet or on RS232/RS485. The machine can send a reject signal to the production information system, keep record and provide report as real time basis. |
NETWORK
| Machines can be connected altogether via Ethernet network to compare adjustments, to copy parameters… |
